New Products

SOMAG Gyrostabilized Mounts

Main pic home office

ClearSkies Geomatics offers state-of-the-art SOMAG Gyrostabilized Mounts that combine traditional physics with modern electronics. SOMAG AG Jena is a world-renowned company that develops and manufactures Gyro Stabilization Devices to carry airborne, land and marine sensors. ClearSkies Geomatics is proud to offer the sale of these devices in North America.

PRODUCTS

SOMAG AG Jena Aerial Mounts

SOMAG AG Land & Marine

Ready to find out more?

Drop us a line today for a free quote!

Dynamic Stabilization Mount - DSM 400

Cost efficient and medium modular stabilization devices gain more importance. For this case we developed the DSM 400, a high class Gyro Mount for medium format cameras and sensors. The Mount comes with a new simplified and redesigned con- trol panel. The panel includes one FMS port and an USB port to connect with our SOMAG Mount Control App.

Key Features

  • Electromechanical gimbal system
  • Gyro Mount for multiple medium for- mat cameras and sensors
  • Passive Vibration Isolation Ring for decoupling of high frequency oscillations
  • Usable with SOMAG Mount Control App

Field of Application

DSM series

Application Examples

  • Riegl VUX-1LR
  • Itres microCASI 1920
  • Phase One Aerial Systems
  • NEO VNIR - 1800

Angular Stabilization Ranges1

  • Pitch - at 0° roll: ≤±10.5°
  • Roll - at 0° pitch: ≤±10.5°
  • Yaw (drift): ≤±25.0°

Residual Angular Rate1

  • ≤0.5°/s rms

Residual Deviation1

  • with IMU support2: ≤0.08° rms
  • Roll - at 0° pitch: ≤±10.5°without IMU support (with feature ‚Performance Boost‘): ≤0.3° rms

Mass

  • 14 kg

Payload3

  • 5...35 kg

Usable Diameter

  • Ø270 mm

Dimensions (Regular Leveling Position)

  • Length: 460 mm/18.1 in
  • Width: 430 mm/16.9 in
  • Height4: 165 mm/6.5 in

Interface

  • RS232 / USB

Operational Voltage

  • 28 VDC (24...30 VDC)

Power Consumption at 28 VDC

  • 30 W rms / Peak 120 W

Recommended Pre-Fuse

  • 15 Amp Fuse

Operating Temperature

  • -15°C...+55 °C

Storage Temperature

  • -40°C...+85 °C

Gimbal System

  • Electromechanical Gimbal System

Applied

  • RTCA DO-160G,EUROCAE-14G,

Standards

  • ISO 7137, 2006/42/EC Machinery

1 Vehicle angular motion <10°/s with typical data acquisition profile frequency spectrum

2 Residual deviation depends on accuracy of used IMU

3 Minimum payload is based on usage of Passive Vibration Isolation Ring

4 Minimum: 131 mm / Maximum: 199 mm

Ruggedized Stabilization Mount - RSM 400

The heat and cold resistant RSM 400 is specifically designed for marine and land applications to capture perfectly stabilized data in rough environments. The design of the base plate allows the adaptation of a wide range of cameras and scanners, making the device very versatile for various applications.

12

Key Features

  • Compact and robust Gyro Mount for use in harsh environments
  • IP Class 67: dust-, salt- and splash-water resistant
  • Optional higher payload up to 35 kg by using stronger engines
  • Operation down to -35 °C possible by installation of additional heating elements
  • Usable with SOMAG Mount Control App

Fields of Application

Land_Sea

Application Examples

  • 360° cameras
  • Antennas
  • Hyperspectral cameras
  • Infrared cameras
  • Mobile laser scanners
  • Thermal imaging cameras
  • Video cameras
ff75aad87c7414a24e259ed15945ecda

Panoramic thermal camera

Angular Stabilization Ranges1

  • Pitch - at 0° roll: ≤±15.5°
  • Roll - at 0° pitch: ≤±15.5°
  • Yaw (drift): no drift correction

Residual Angular Rate1

  • ≤0.5°/s rms

Residual Deviation1

  • with IMU support2: ≤0.2° rms
  • Roll - at 0° pitch: ≤±10.5°without IMU support (with feature ‚Performance Boost‘): ≤0.5° rms

Mass

  • 6.6 kg

Payload

  • 0...15 kg (optional 35 kg)3

Usable Mounting Space

  • Ø286 mm

Dimensions (Regular Leveling Position)

  • Diameter: Ø335 mm
  • Height4: 156.5 mm

Interface

  • RS422 / USB

Operational Voltage

  • 28 VDC (24...30 VDC)

Power Consumption at 28 VDC

  • 70 W rms / Peak 130 W

Recommended Pre-Fuse

  • 7.5 Amp Fuse

Operating Temperature

  • -15 °C (optional -35°C)...+55 °C

Storage Temperature

  • -40°C...+85 °C

Gimbal System

  • Electromechanical Gimbal System

Applied

  • RTCA DO-160G,EUROCAE-14G,

Standards

  • ISO 7137, 2006/42/EC Machinery

1 Vehicle angular motion <10°/s with typical data acquisition profile frequency spectrum

2 Residual deviation depends on accuracy of used IMU

3 35 kg optional available/ movement range reduced to ≤±12.5° in Pitch and Roll, Height: 158 mm

4 Minimum: 132.5 mm / Maximum: 180.5 mm

Gyro Stabilization Mount - GSM 4000

The GSM 4000 is the flagship of the airborne product line and was developed for large format sensors. SOMAG‘s largest three axes gimbal is extremely powerful with a payload up to 120 kg. The control panel on top of the mount guarantees user-friendly handling. The USB port allows you to connect the device with the SOMAG Mount Control App.

GSM_4000.425

Key Features

  • Hydraulic gimbal system for highest stiffness with unmatched dynamics
  • Lift up function for easy accessibility of the camera lens or the bottom of the sensor
  • Passive Vibration Isolation Ring for decoupling of high frequency oscillations
  • Usable with SOMAG Mount Control App

Field of Application

Air_Vex

Vexcel UltraCam‘s

Application Examples

1234

Riegl LiDAR‘s

Titan_IGI

Teledyne Optech LiDAR‘s
IGI Mapping Systems

GSM_4000.424

Angular Stabilization Ranges1

  • Pitch - at 0° roll: ≤±8.8°
  • Roll - at 0° pitch: ≤±7.0°
  • Yaw (drift): ≤±25.0°

Residual Angular Rate1

  • ≤0.2°/s rms

Residual Deviation1

  • with IMU support2: ≤0.02° rms
  • Roll - at 0° pitch: ≤±10.5°without IMU support (with feature ‚Performance Boost‘): ≤0.3° rms

Mass

  • 29 kg

Payload3

  • 10...120 kg

Usable Diameter

  • Ø410 mm

Dimensions (Regular Leveling Position)

  • Length: 615 mm
  • Width: 530 mm
  • Height: 175 mm

Interface

  • RS232 / USB

Operational Voltage

  • 28 VDC (24...30 VDC)

Power Consumption at 28 VDC

  • 50 W rms / Peak 180 W

Recommended Pre-Fuse

  • 15 Amp Fuse

Operating Temperature

  • -20°C...+60 °C

Storage Temperature

  • -55°C...+85 °C

Gimbal System

  • Hydraulic Gimbal System

Applied

  • RTCA DO-160G,EUROCAE-14G,

Standards

  • ISO 7137, 2006/42/EC Machinery

1 Vehicle angular motion <10°/s with typical data acquisition profile frequency spectrum

2 Residual deviation depends on accuracy of used IMU

3 Minimum payload is based on usage of Passive Vibration Isolation Ring

4 Minimum: 149.5 mm / Maximum: 200.5 mm

Offshore Stabilization Mount - OSM 4000

SOMAG AG Jena's latest development - the OSM 4000 combines power with versatility . A combination of high-power engines and a hydraulic gimbal system enables the Mount to lift an unprecedented payload up to 160 kilos. The weatherproof design makes this device extremely ruggedized. Even harsh conditions set no limits to its functionality and precise performance.

OSM_4000.309

Key Features

  • Compact and robust Gyro Mount for use in harsh environments
  • IP Class 67: dust-, salt- and splash-water resistant
  • Optional higher payload up to 35 kg by using stronger engines
  • Operation down to -35 °C possible by installation of additional heating elements
  • Usable with SOMAG Mount Control App

Fields of Application

Land_Sea

Application Examples

  • 360° cameras
  • Antennas
  • Hyperspectral cameras
  • Infrared cameras
  • Mobile laser scanners
  • Thermal imaging cameras
  • Video cameras

Angular Stabilization Ranges1

  • Pitch - at 0° roll: ≤±10.0°
  • Roll - at 0° pitch: ≤±13.0°
  • Yaw (drift): no drift correction

Residual Angular Rate1

  • ≤0.5°/s rms

Residual Deviation1

  • with IMU support2: ≤0.2° rms
  • Roll - at 0° pitch: ≤±10.5°without IMU support (with feature ‚Performance Boost‘): ≤0.5° rms

Mass

  • 39 kg

Payload

  • 0...160 kg

Usable Mounting Space

  • Ø600 mm

Dimensions (Regular Leveling Position)

  • Diameter: Ø665 mm
  • Height: 236.5 mm

Interface

  • RS422 / USB

Operational Voltage

  • 28 VDC (24...30 VDC)

Power Consumption at 28 VDC

  • 100 W rms / Peak 650 W

Recommended Pre-Fuse

  • 20 Amp Fuse

Operating Temperature

  • -15 °C (optional -35° C)...+55 °C

Storage Temperature

  • -55°C...+85 °C

Gimbal System

  • Hydraulic Gimbal System

Applied

  • RTCA DO-160G,EUROCAE-14G,

Standards

  • ISO 7137, 2006/42/EC Machinery

1 Vehicle angular motion <10°/s with typical data acquisition profile frequency spectrum

2 Residual deviation depends on accuracy of used IMU

3 without wind force / average power consumption with wind force (200 Nm) = 225 W

4 Minimum: 199 mm / Maximum: 274 mm

Compact Stabilization Mount - CSM 40

The CSM 40 is part of our new Mount generation, which is extra small and cost efficient. The compact design and highly functional modularity enable a powerful mounting system, which is particularly suitable for ultralight aircraft and drones. Like all SOMAG airborne Mounts, the CSM 40 offers a control panel and can also be con-nected to the SOMAG Mount Control App.

csm40

Key Features

  • Electromechanical gimbal system
  • Gyro Mount with minimum dimensions and weight for single medium format cameras and sensors
  • Optional Passive Vibration Isolation Ring for decoupling of high frequency oscillations
  • Usable with SOMAG Mount Control App

Field of Application

Application Examples

  • Leica RCD 30 Hasselblad A6D
  • Phase One iXU/iXM series
  • Specim AisaKESTREL

Angular Stabilization Ranges1

  • Pitch - at 0° roll: ≤±15.0°
  • Roll - at 0° pitch: ≤±15.0°
  • Yaw (drift): ≤±25.0°

Residual Angular Rate1

  • ≤0.5°/s rms

Residual Deviation1

  • with IMU support2: ≤0.08° rms
  • Roll - at 0° pitch: ≤±10.5°without IMU support (with feature ‚Performance Boost‘): ≤0.3° rms

Mass

  • 5.2 kg

Payload

  • 0...15 kg

Usable Diameter

  • Ø130 mm

Dimensions (Regular Leveling Position)

  • Length: 290 mm
  • Width: 275 mm
  • Height4: 121 mm

Interface

  • RS232 / USB

Operational Voltage

  • 28 VDC (24...30 VDC)

Power Consumption at 28 VDC

  • 30 W rms / Peak 120 W

Recommended Pre-Fuse

  • 5 Amp Fuse

Operating Temperature

  • -15°C...+55 °C

Storage Temperature

  • -40°C...+85 °C

Gimbal System

  • Electromechanical Gimbal System

Applied

  • RTCA DO-160G,EUROCAE-14G,

Standards

  • ISO 7137, 2006/42/EC Machinery

1 Vehicle angular motion <10°/s with typical data acquisition profile frequency spectrum

2 Residual deviation depends on accuracy of used IMU

3 Payload installation level: 110 mm / Minimum: 86 mm / Maximum: 134 mm